You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Impulse 150 Classic

Impulse 150 Classic
315 kg
Breaker weight
75 mm
Tool diameter

Tool operating length, mm


Maximum pressure, bar


Impact Energy, J

Price on request Sale

Impulse 150 Classic is the optimal hydraulic breaker for backhoe loaders and mini excavators with a capacity of up to 10 tons.

Hydraulic breaker Impulse 150 Classic is the most technically advanced hydraulic breaker.

Impulse 150 Classic stands out from the competitors with the following features and advantages:

  • The impact block of the hydraulic breaker is free of the tie rods. Therefore, the load is distributed in process of breaking over the whole body of the breaker, which prevents potential kinks of studs, one of the weakest points in the design of hydraulic breakers of other manufacturers.
  • Use of a full-metal bushing in the hydraulic breaker design increases its service life time up to 2 times.
  • Application of this technical solution helped reduce the amount of consumables twice and the cost of maintenance and consumables up to 5 times.
  • During the hydraulic breaker operation, a system of protection against idle impact is successfully used, which prevents premature wear of the tool locking pin and the working tool itself, which in turn significantly reduces the breaker operation cost.
  • The hydraulic breaker is made with a minimum number of fasteners, and the hydraulic breaker jaws are made of high-strength Swedish steel Domex.

All the listed features of the Impulse 150 Classic hydraulic breaker guarantee reliability, high performance and low cost of ownership. Hydraulic breaker Impulse 150 Classic is a solution of your problems!

It is advised to install hydraulic breaker Impulse 150 Classic on excavating equipment with the bucket capacity 0.12–0.5 m³ and the base machine weight up to 5-10 tons.

Benefits of Impulse Classic hydraulic breakers:

  • No tie through-bolts, which prevents scoring of piston and sleeve.
  • The working tool bushing is one-piece and has an extended service life up to 30%.
  • Possibility to install a hydraulic accumulator (option).
  • The jaws are made of high-strength reinforced steel QUEND with strength and wear resistance up to 20% higher.
  • Pressing force is 2 times lower; it provides fast start and perfect positioning.
  • Consumables are quickly replaced without use of presses and special pullers.
  • Special anti-corrosion coating of the striker reduces the risk of corrosion in case of deviations in the storage conditions.
  • A wide range of products and continuous availability on stock.
  • Hydraulic breaker is assembled in Russia with the use of imported components (seals, spool pair, charging valve, etc.) from the world's leading manufacturers.
  • Impulse hydraulic breakers are exported to Australia, South Africa, China, Italy and Brazil.

Impulse 150 hydraulic breaker applicability

backhoe loaders
TerexHR30, 760, 820, 860, 970
New HollandLB110, LB115.B
KomatsuKomatsu WB 91, WB 93R, WB 93S, WB 95, WB 97S, WB98
VolvoBL 61, BL 71 (Plus)
MecalacTLB870, TLB890, TLB990
Case580SR, 590SR, 695SR
MiscellaneousFIAT-HITACHI FB-200
mini loaders
HyundaiHSL 1500T
mini excavators
HyundaiROBEX 55W-7
Caterpillar428E, 432E, 434E, 436E, 444E
JCB8060, 8080 ZTS
HitachiZAXIS 70LC, ZX80LC
RussiaTVEX EK-6, EBP-5, EPB-7, EPB-9, EPB-11 Belovezh
Model nameImpulse 150 Classic
Pneumo-hydro accumulatorn/a
Dust sealn/a
Underwater operationn/a
Hydraulic breaker typepiston type breaker
Tool operating length, mm400
Tool operating length, inch15.75
Maximum pressure, bar200
Breaker length without tool, without mounting plate, mm1040
Breaker length without tool, without mounting plate, inch40.95
Body typeopen
Carrier weight, t5-10
Carrier weight, tonnes (American)5,5-11
Breaker weight, kg315
Breaker weight, lb694.57
Tool diameter, mm75
Tool diameter, inch29.52
Impact Energy, J1210
Impact frequency, bpm450-900
Operating pressure, bar130-150
Oil flow, l/min40-80
Oil flow, gallon/min8,8-17,6